1.What should I go for threaded pipe from shanghai rolling thread?
The rolling pipe threads technology from Shanghai make its manufacturing processes unique from other pipe materials by mixing top class heavy duty lathe presses. It generates heat to create galvanized, black and close pipe nipples
2.What is the primary step to unclog any blockage in my kitchen pipes?
The best technique to unclog blockage is, pour hot water through the pipes. If it doesnt work, then use other options.
3.Can we use trench less technology on a bellied line?
No, because by doing this, the sleeve will start chasing the existing pipe and will end up with a belly.
4.Which drain cleaning product should I use to get my drains flowing better?
Prefer enzyme-type drain cleaner, like Roto-Rooter Pipe Shield. The natural enzymes in it will suck in all the grease, hair, and will protect the pipe against sludge.
5.Why is Galvanizing important in the field of plumbing and why I choose this?
In Galvanization process, the steel or iron is wrapped with protective zinc coating order to prevent premature rust and corrosion. The galvanized steel pipe fittings are still considered as a safe transporting material for drinking water.
6.Are galvanized pipe nipples more cost effective than other pipes?
Yes, both galvanized fittings and galvanized pipes are more affordable than other protective methods. Additionally, galvanizing is less labor intensive, another main reason to low down the cost.
7.What is the difference between a sewage ejector pump & a grinder pump?
A sewage ejector pump consists of impellers which enable the pump to pass an adequate size of solid matter without clogging the discharge.
It is mostly used when waste doesnt need to commute a great distance to the main drain line. While grinder pump comprises of cutter blades which helps in shearing waste solids.
8.What is meant by plumbing Code?
Plumbing code provides regulation for installation, designing, sanitary systems, and inspection of building plumbing.
9.Will Natural Gas Corrode Galvanized Pipe?
It used to happen in the past due to the poor quality of galvanizing. However, there are still many areas which dont allow galvanized pipe underground for gas piping, rather they prefer black pipes or black pipe nipples.
10.How do I get a snake down a tub drain?
In order to put a snake down the drain, first, take off the overflow plate. Its a round thing on the tub wall with two screws. Once you pull it out, you will see two sections of the stopper mechanism.
11.What happens when roots get inside lines?
If roots do not get disturbed, then it will fill the pipe with multiple hair-like root masses at each point of entrance. Its easy for root masses to get clogged even with toilet tissue, grease, and other debris which flow from homes and businesses to the main sewer, leading to showered drains and reduced flow.
12.What is a Building Drain?
The building drain is the lowest point in a drainage system where the inside waste pipe meets and are passed on into the sewer alludes as Building Drain.
13.What skills does a plumber should have?
Anyone who wants to make a successful career in plumbing, they must develop the following skills such as;
14.What safety precautions a plumber should take for health and safety purpose?
Consider the following steps to stay safe from all kinds of health issues and harmful injuries;
15.What a Pipe Dope is?
It is a kind of pipe joint which is used for creating a watertight seal.
16.Whats the difference between an Automatic & Non-automatic pump?
The automatic pump comes consist of built-in float switch which turns on the pump habitually at a fixed water level. While, a non-automatic pump needs to get on and off manually, or it needs a separate control like a piggyback float switch.
17.Why does my drain get clogged?
The drains get clogged when you dont pay any attention while through things in your kitchen or bathroom sink like grounded coffee beans, and oil etc.
18.How can I Prevent My Pipes from Freezing?
Let the cold water drip from a faucet served by exposed pipes. Gradually, it will start melting and running water through the pipe. This might help prevent pipes from freezing.
19.Why Pressure Regulator Valve (PRV) or Copper Piping is important?
Because its important to get the right tool! When the water is used, it delivers a good distance away, what’s more, it’s constrained by a pressurized framework. Having a PRV and quality channeling can be the distinction unwavering quality and a gigantic wreckage.
20.What to do when toilet or drain stinks?
There come to some pipe nipples with curves in them to hook trash before it goes to the sewer (like solid waste, grease, or food). You can disassemble U-curve or clean it, or utilize dye or vinegar to separate the gunk. Turn on a fan to suck up the scent.
21.How to fix a leaking shutoff valve or hose bib that drips from the top?
Tight the packing nut located which lies below the valve handle. If you will turn it halfway, it will usually tighten it enough. If it still leaks, then you need to replace the valve.
22.What to do when water drips consistently from the ceiling, and even taps and bathtub stop running?
If the leak is not getting under control, and if keep on getting worse, it means there is leakage in the water supply line.
23.How do I fix a leaky shut-off valve or boiler drains?
There is a packing nut in every valve behind the handle which becomes lost when it is closed and opened again and again. Compression the packing nut will discontinue the dripping in maximum cases.
24.How often our bathroom plumbing needs maintenance?
Whether its a working place, or home; your bathroom plumbing maintenance should be done twice a year, or after every 18 months, or when you encounter any problem with your bathroom plumbing.
25.What is the best way to detect Leak before digging?
Simple, you just need an underground leak detector to check any leakage before digging.
26.What do we call a Water Jetter?
A water jetter is a high fueled impact hose that is embedded into funnels to overwhelm blocks, soil, and grime.
27.How can I Unclog the main sewer line?
For doing this, youll need to locate the clean out plug in your crawl space, garage basement, or outer the foundation of your house. Embed a wood screw link or sewer pole into the wipe outfitting and work it through to the point that it clears the block.
28.How do roots grow into pipes?
Roots will always grow in the presence of water in the soil. Hence, roots are attracted to sewer funnels, which urge tree roots to develop into them.
29.What to do if roots starts clogging sewer drains?
Let your plumber inspect the drains thoroughly to discover those roots which are clogging your sewer drains and solve the problem.
30.How can I control root growth in pipes?
Ask your plumber to run cutting blades through the pipes. Another way is, flush a root development suppressant down twice every year to restrain growth.
31.Can I trim out Roots out of Storm water Lateral?
Yes, you can trim our roots out of any cast iron, plastic, or clay tile storm water lateral pipe, as well as from wavy iron and thin wall pipes.
32.What could be the best way to prevent clogged drains in home?
Avoid putting oils, greases, hair, coffee grinds, pasta, carrots or apple cores going down the drain. These materials are stopped by drain stoppers to go down your drain.
33.Suggest me the convenient way to Repair a Cracked Toilet Tank
Turn off the water supply to the tank, use a suction device to remove the remaining water. Let the tank dry. Third, apply epoxy to the crack. Smooth the epoxy out and sit tight for it to dry to repair your split latrine tank.
34.How to Test the toilet leaking?
Its easy! Open toilet tank and pour few drops of food color into it to check if your toilet is leaking. Leave it for 10-15 minutes, come back and see the color inside the toilet bowl, whether it has changed or not?
If you see the color changed, there is a leakage, if there is no change in color, then you do not have a leak.
For more informative articles, blogs, DIY Tips and best plumbing suggestions stay tuned to Chithreads